Boston Acoustics

close x

Join us

High Output LCR speaker for powerful and dynamic theater at home

 write your own review
Zoom
  • price

    $799.99
  • Color

close x

Send to Friend

Free Shipping

Overview

The ultimate home theater and digital music speaker for medium and large rooms.

Boston BT Series set new performance standards for speakers designed for use in A/V cabinetry or the front theater stage. Coupled with appropriate amplification, BT systems are capable of delivering massive output typically associated with commercial movie theater or concert hall performances. From explosive music and pounding effects to the most artistic texturing and softest whispers, BT’s extraordinary power handling and sensitivity allow extreme audio levels while preserving the subtlest details. All without the enormous speaker size and mass normally required for true big theater sound. Sound so detailed and dynamic, it’s utterly stunning. Clear and uncolored across the entire audio spectrum. This is the award-winning, true-to-the original performance known as the Boston Sound.

Every aspect of the BT2 has been thoroughly thought out. The width of the BT2 is a standard component size of 171/2" allowing easy installation into A/V cabinetry. Die-cast “finger pulls” positioned at the front of the speaker enclosure provide easy installation in tight cabinet spaces, supplied neoprene pads prevent scratching and allow for smooth slide-in positioning of the speakers. All cable input terminals and switches are recessed at the rear of the speaker.

The BT2’s midrange/tweeter baffle can rotate 360 degrees for horizontal or vertical placement in cabinetry—maintaining the proper sonic vertical alignment of the mid-range and tweeter. The baffle may also be angled for more accurate imaging when the speaker is far off-axis. Made from ridged die-cast aluminum, the baffle’s thermal mass provides tremendous heat dissipation for the midrange and tweeter improving power handling and reliability.

The BT2 uses Boston’s 1-inch VR® high-output aluminum-dome tweeter, and 4½-inch neodymium midrange with 1½”-inch voice coil. Two 8-inch woofers using 1 ½-inch voice coils, neodymium magnets and cast aluminum baskets provide powerful bass. This driver compliment delivers an astounding 400 watts power handling with 93dB sensitivity.

The BT2 will live behind a perforated video screen or cabinet grille cloth in most installations. It features a Screen Compensation Switch to accommodate installation in this environment. A Flush Mount Switch can compensate for response anomalies caused by placement issues found in some theater stages and A/V cabinets. It also comes with full-coverage metal grilles for bookshelf or speaker stand placement.
  • High-output L/C/R and surround speaker can handle up to 400 watts
  • Dual 8" cast Neo magnet woofers with 1-1/2" voice coil
  • 4-1/2" Neo magnet midrange with 1-1/2" voice coil
  • 1" VRH.O.™ aluminum dome tweeter with AMD™
  • M/T baffle rotates to maintain sonic alignment of drivers for better imaging
  • Cast M/T baffle acts as a heatsink for higher power handling
  • Die-cast "finger pulls" allow easy installation in tight spaces

Specifications

Nominal Impedance
6 ohms
Crossover Frequency
500 and 3200kHz
Bass Unit
Dual 8" (200mm) cast Neo magnet, 1-1/2" voice coil
Dimensions (HxWxD)
18 x 17-1/2 x 14-1/4" (458 x 445 x 362mm) w/grille
Recommended Amplifier Power
20–400 watts
Frequency Response (±3dB)
60Hz-22kHz
Finish
Black
Sensitivity (1 watt (2.83v) at 1m)
93dB
Tweeter
1" VRH.O.&trade aluminum dome tweeter with AMD&trade
Midrange
4-1/2" (115mm) cast Neo magnet, 1-1/2" voice coil

you may also like

© 2014 D&M Holdings, Inc. All rights reservedSite Map  |  Privacy Policy  |  Terms & Conditions  |  Warranty  |  Contact Us  |  About Us  |  Dealers  |  My Account
close x

sign in

create an account

(Note : Password should be a minimum of 7 characters and maximum of 14 characters including one digit.)