Boston Acoustics

close x

Join us

High Humidity 2-Way 6-1/2" In-Ceiling Single Speaker Stereo

Zoom
close x

Send to Friend

Overview

VSi H470T2 weather-resistant in-ceiling speaker is designed for outstanding durability and exceptional sonic performance. This weather-resistant ceiling speaker can be used in bathrooms and other moist interior locations as well as exterior locations that include some protection from the elements.

Rigorously tested Boston Acoustics High Humidity in-ceiling speakers go through an exhaustive life test that submits the speakers to many years of exposure to the elements. The loudspeakers are designed to pass the internationally recognized IEC529 and Mil Spec 810. These tests simulate approximate climatic conditions and provide an indication of the degrees of weather resistance. Boston Acoustics further submits these models to long term in-use testing throughout the country.

VS Series Custom Speakers are the ultimate in high performance audio. VS Series speakers take key innovations from our most touted traditional loudspeakers and skillfully adapt them for in-wall and in-ceiling applications. Features include die-cast woofer baskets and massive front baffles that add rigidity while ensuring precise alignment of driver components for unparalleled accuracy and near-zero distortion. We also use die-cast aluminum to create a patented pivoting tweeter cup that acts as a heat sink – bringing concert hall quality to any room. Finally, all VS Series models include a boundary compensation switch that allows the sound to be precisely tailored to counteract the effects of being installed too close -- or too far from, a corner. The result is optimum sound from any installation location.

  • Standard baffle design
  • High humidity, weather resistant
  • 2-Way
  • Single speaker stereo
  • 6 ½-inch copolymer woofer
  • Dual 1-inch Kortec tweeters

Specifications

Nominal Impedance
8 ohms
Crossover Frequency
3200Hz
Mounting Depth (from surface)
4 9/16” (115mm)
Bass Unit
6-1/2" (165mm) DCD copolymer
Recommended Amplifier Power
10-100 watts
Frequency Response (±3dB)
60Hz-20kHz
Sensitivity (1 watt (2.83v) at 1m)
91dB
Tweeter
1" (25mm) Kortec dome
External Dimensions
10-5/16" (262mm)
Mounting Hole Cutout
8-7/8" (225mm)

you may also like

© 2014 D&M Holdings, Inc. All rights reservedSite Map  |  Privacy Policy  |  Terms & Conditions  |  Warranty  |  Contact Us  |  About Us  |  Dealers
close x

sign in

create an account

(Note : Password should be a minimum of 7 characters and maximum of 14 characters including one digit.)